Table of Contents
Advertisement
NetDVR.book Page 38 Wednesday, May 12, 2004 4:06 PM
NetDVR | User's Guide | Playback
5.1.1 Select a NetDVR to playback
If a NetDVR is already selected, its nickname or IP Address is shown in the address field
(top right).
•
Reconnect by clicking the
•
Enter the User Name and Password of the device and click on the OK button.
To select a NetDVR (if no selection is already shown) or to change a selection:
•
Click on the
•
Expand the 'My Cameras' or 'Local Area Cameras' folders by clicking the [+] in front of
the name to list the installed devices.
•
Select a NetDVR by double-clicking on its name or by clicking the name once and then
clicking on the 'OK' button.
•
After a NetDVR has been selected its IP address or 'Nick Name' will be displayed in the
address filed.
5.1.2 Select a NetDVR to playback
•
Reconnect by clicking the Connect button.
•
Enter the User Name and Password of the
device and click on the OK button.
To select a NetDVR (if no selection is already
shown) or to change a selection:
•
Click on the "Open backup file..." button
in the Explorer window.
•
From the "Open" explorer window
navigate to the backup folder.
•
Select a backup file by double-clicking on
its name or by clicking the name once and
then clicking on the 'OK' button.
•
Enter a Password when prompted to do so.
•
After a NetDVR has been selected its file
name will be indicated in the address bar
and the file is opened for playback.
Bosch Security Systems | 2004-01
'Connect' button.
'Select Camera' button to open the Explorer.
38
Advertisement
Table of Contents
