Table of Contents
Advertisement
NetDVR.book Page 23 Wednesday, May 12, 2004 4:06 PM
NetDVR | User's Guide | Configuring the NetDVR
3.6 Setting Channel information ('Channel' tab)
Channel Use
3.6.1
The 'Channel' tab function configures channels
to view live images and to record them on the
NetDVR's internal HDD.
•
Select one or more channels (Channel 1– 4)
as video source(s).
Note:
It is very important to select only the channels that have
an external camera connected. Otherwise recording speed
or transmission speed may be slower.
3.6.2 Camera Configuration
In the 'Camera Configuration' section the cameras type is defined:
•
Check 'NTSC' or 'PAL' according to TV standard of the connected cameras.
•
Check 'Rotation 180°' to rotate an image by 180° (if camera is mounted upside-down, for
example, suspended from a ceiling).
•
Check 'B&W' if a monochrome (black and white) camera is used.
3.6.3 Motion Threshold
The 'Motion Threshold' function sets the motion detection threshold.
The range is from 1 to 999. An entry of '1' is the lowest threshold giving highest sensitivity,
and '999' is the highest threshold giving the lowest sensitivity. The default value is '500'.
Bosch Security Systems | 2004-01
23
Advertisement
Table of Contents
