Specifications - Bosch Flasher-PRO User Manual

Specifications

Flasher-PRO Specifications:
Name
Input Voltage Range
Supply Current
Operating Temperature
Storage Temperature
Size
Bus Protocols
Primary CAN / ISO15765 / GMLAN
f
Secondary CAN / ISO15765 / GMLAN (Dual or Single Wire)
f
Ford SCP (J1850PWM)
f
GM Class2 (J1850VPW)
f
KWP2000 (ISO9141/14230)
f
Chrysler SCI (J2610)
f
Other
Compliant to SAE J2534 (Feb 2002) and SAE J2534-1 (Dec 2004)
f
Compliant to ISO 22900-1 MVCI physical layer
f
Programming voltage on J1962 pin 6, 9, 11, 12, 13, 14 or Aux
f
Ground pins 9, 12, or 15
f
Note: Drawing current in excess of 200ma on a line configured for
FEPS programming voltage may damage the Flasher-PRO hardware.
Avoid grounding any output pin configured for programming voltage!
Battery Voltage is fused (auto reset) at 200mA.
Flasher-PRO User's Manual | August 2008
Specifications | Flasher-PRO | 9
Value
6VDC to 26VDC
320mA @ 6VDC
200mA @12VDC
170mA @15VDC
+0C to +60C ambient
-65C to +100C ambient
1.25"H x 7.5"D x 5.25"W
Robert Bosch LLC