Vehicle Check Program; Debug Check Program - Bosch Flasher-PRO User Manual

Setting Up the Flasher-PRO | Flasher-PRO | 7
PRO drivers are installed correctly, run "Install_Check.exe" from the CD
included with your Flasher-PRO. If your drivers are installed correctly
the program will show:
"Flasher-PRO USB Installed"
If you do not see either of these entries then your Flasher-PRO drivers
are not installed.

Vehicle Check Program

The Vehicle Check program is a handy utility that allows a user to
find what communication protocol a vehicle uses and the VIN number
associated with that vehicle. To use the Vehicle Check program first
make sure that your Flasher-PRO is connected to a vehicle and to
your PC, and also have the vehicle's key in the ON position. Run the
"Vehicle_Check.exe" program from the CD. Make sure your Flasher-
PRO is selected from the drop down box and click "Check Connection."
Each OBD protocol will be checked for a vehicle connection and VIN.
The results will be displayed in the appropriate column.

Debug Check Program

The Debug Check Program is a tool that our customers can use when
they are having trouble with J2534 communications. The program
enable debugging for the Flasher-PRO and gives Tech Support good
insight into a problem.
To turn debugging on, run the "Debug_Check.exe" from the CD that
came with your Flasher-PRO. Once the program is running, make sure
there is a check mark next to "Flasher-PRO" in the upper left corner.
Next Click "Enable Debug." Now when you run your J2534 application
a file is made that allows us to see what messages get sent through
the Flasher-PRO. This file is saved in the C:\Documents and Settings\
USERNAME\Local Settings\Temp directory for XP and the C:\Users\
USERNAME\AppData\Local\Temp directory for Vista.
To send support a debug file, run "Debug_Check.exe" from the CD
and click on "Read Debug file." You will have to pick the debug file
from the window. They are saved as a text file and look similar to this:
"DebugPlus_1216221943_6936.txt" Once you have the file selected
click "Open." Now copy all of the text in the screen and E-mail it to
support.
Flasher-PRO User's Manual | August 2008 Robert Bosch LLC