Troubleshooting And Support - Bosch Flasher-PRO User Manual

10 | Flasher-PRO | Troubleshooting and Support

Troubleshooting and Support

If you cannot communicate with Flasher-PRO
Ask the following questions:
Does Flasher-PRO have power, and is the green power LED illuminated?
Is the battery or power supply voltage between 6VDC and 15VDC, with
correct polarity?
Could any firewall software be interfering with the Ethernet port?
Are you using the correct Ethernet cable: a cross-over cable if
connected directly to a computer or a standard patch cable if
connected to a hub or switch?
Is the green status light illuminated for Ethernet, USB, or wireless?
If these issues have been addressed, verified, and you are still having
trouble, please contact Bosch.
If you need to recover from incorrect
settings (Ethernet Only)
If you are using Ethernet and would like to reset configuration to
default, go to http://Flasher-PRO/, select "Boot Options" and click the
"Load Factory Default Settings" button. Use the default username root
and password powerful when requested.
If all else fails and you cannot reach the Flasher-PRO webpage, hold
down the black button on the front of the Flasher-PRO while powering
on Flasher-PRO to enter recovery mode. This resets Flasher-PRO to
"Client Then Server" mode; it is useful when Flasher-PRO is configured
for an unknown static IP address or invalid boot options.
If you need to generate a logfile for debugging
Please see previous section: Flasher-PRO Debug Check Program
If you need to update drivers or firmware
Your Flasher-PRO contains field-upgradeable firmware. Updates are
regularly released which: include new features, improve performance,
Robert Bosch LLC Flasher-PRO User's Manual | August 2008