Product Overview; Connectors And Status Indicators; Front Panel - Bosch Flasher-PRO User Manual

2 | Flasher-PRO | Getting to Know Flasher-PRO
Getting to Know Flasher-PRO
The Flasher-PRO supports all modern vehicle reprogramming protocols
including: J1850VPW, J1850PWM, CAN, ISO 15765, ISO 9141, ISO
14230/KWP2000, and Chrysler SCI
Your package includes: the Flasher-PRO hardware, a MVCI-J1962
vehicle interface cable, a USB cable, an Ethernet cable, and a CD
including drivers and support tools.
Because J2534-1 is a widely accepted standard, the Flasher-PRO will
work with a variety of ECM reprogramming applications. The EPA-
Published regulation has led to publicly available reprogramming
applications from almost every major automaker. These applications
will allow independent repair shops to update the calibrations on
newer automobiles.

Connectors and Status Indicators

Front Panel

There are 6 status lights on the front panel of the Flasher-PRO.
These status lights are useful for troubleshooting the Flasher-PRO's
connection to a PC.
Figure 1: Flasher-PRO front plate
The yellow warning light indicates that Flasher-PRO is communicating
with the vehicle. Do not disconnect while this is illuminated! If you
interrupt a reflash while the vehicle's ECU s blank or only partially
programmed, the module may be unrecoverable. Refer to Table 1 for a
description of the other status lights.
Robert Bosch LLC Flasher-PRO User's Manual | August 2008