Audio Modes; Volume Control; Voice Communication; Accessing The Dialer Window - Honeywell Dolphin 60s User Manual

Audio Modes

The Dolphin 60s terminal is equipped with speakers on the front and back of the terminal and a micro-
phone that you can use to send and receive audio signals over the GSM network, see
Dolphin 60s on page
There are three audio modes:
• Handset Mode - The front speaker is used for receiving handset voice calls.
• Headset Mode - When a headset is plugged into the Audio Jack, the terminal defaults to the
headset for receiving calls and audio input.
• Hands-Free Mode - The back speakers are used a speaker phone. To switch to speaker phone
during a call, touch on the phone icon in the tile bar at the bottom of the screen, then select
Speaker On.

Volume Control

Press the up or down arrow on the Volume Control button on the left side of the device to adjust the
volume of the active speaker, see

Voice Communication

Accessing the Dialer Window

Note: The WWAN radio must be active for voice communication, see
To open the Phone dialer do one of the following:
• From the Home screen, touch twice on "phone".
• From the Home screen, touch
• Press the Send button
9 - 4
3-4.
Volume Control Button
.
on page
Enabling the WWAN Radio
> Phone .
Features of the
3-9.
on page 9-3.