Back Panel - Honeywell Dolphin 60s User Manual

Back Panel

Auxiliary Battery Well
USB Port
Auxiliary Battery Well
The base enables you to charge an additional battery pack independently of the terminal well
in 6 hours for the extended battery. This feature ensures that you can always have a fully-
charged battery for your terminal. See
on page 12-6.
USB Port
This USB port is USB v2.0 Hi-Speed (480 Mbps) compliant. Using a USB cable, you can
connect the base to a host device, such as a workstation. USB communication occurs through
Microsoft ActiveSync (v4.5 or higher) or Microsoft Windows Mobile Device Center (WMDC)
depending on the host workstation's operating system. When the terminal is seated in the
terminal well, it is connected to the host device via the base.
Note: ActiveSync on your Dolphin terminal works with Windows Mobile Device Center on host
workstations running Windows Vista or Windows 7 and with ActiveSync on host workstations
running Windows XP. For detailed information on ActiveSync and WMDC visit Microsoft's
Windows Mobile Web site.
DC Power Jack
See Power
12 - 4
DC Power Jack
on page 12-5.
Charging a Spare Battery in the Auxiliary Battery Well