Connecting The Terminal To A Wireless Network; Adding Programs Using The Internet - Honeywell Dolphin 60s User Manual

1. If you cannot find any installation instructions for the program in the Read Me file or documentation
provided with the software, do one of the following:
a. Open ActiveSync and click Explore, or
b. Open Windows Mobile Device Center and click File Management
2. On the workstation, navigate to the folder containing the program file(s).
3. Copy and paste the file(s) into the Program Files folder on the Dolphin terminal.
Note: If you want the program to be part of the Autoinstall that occurs after a factory reset or software upgrade,
paste the program file(s) in both the
\Honeywell\Autoinstall
4. On the terminal from the Start screen, touch File Explorer, navigate to the folder where the
program is located.
5. Touch on the program file to start the installation.
Note: If you copied the file to the
to install the program. For more information, see

Connecting the Terminal to a Wireless Network

You connect the terminal to a wireless network through the on-board radio (802.11b/g/n, Bluetooth, and/
or GSM). Each radio has its own configuration utility and requires specific information about the wireless
network to connect. Successful connection depends on your network infrastructure about which you will
need specific information from your network administrator.
WLAN (802.11b/g/n)
The Dolphin 60s has a 2.4 GHz 802.11b/g/n WLAN (Wireless Local Area Network) radio. The radio is
interoperable with other 802.11b/g/n, Wi-Fi compliant products including access points (APs), worksta-
tions via PC card adapters, and other wireless portable devices. The next step is to configure the
connection parameters of the radio to connect to a wireless network.
WLAN Radio
The WLAN radio is configured in the Honeywell WLAN Security Supplicant, which you access by
touching the WLAN SWC icon on the Start menu. For complete configuration instructions, download the
Honeywell Secure Wireless Client (SWC) User's Guide from www.honeywellaidc.com. A link to this
guide appears on the Dolphin 60s product page.

Adding Programs Using the Internet

When you have established a network connection, you can access the Internet and download additional
software programs.
Note: When selecting programs, verify that the program and version of the program are designed for Windows
Embedded Handheld and the terminal's processor. You can verify your processor by touching
> Settings > System > About > Version . Make a note of the information in the Processor field.
1. Open Internet Explorer and navigate to the program's location. You may see a single *.exe or
setup.exe file, or several versions of files for different device types and processors.
2. Select the program version that matches your Dolphin terminal and processor.
8 - 12
\IPSM\Honeywell\Autoinstall
.
\Honeywell\Autoinstall
Hardware Maintenance
folder and the
folder, you can perform a Soft Reset
on page 3-15.