Buttons - Honeywell Dolphin 60s User Manual

Buttons

The Dolphin 60s has three programmable buttons: Right Scan/Image side button, Left and Right Soft
Key buttons. Use the Buttons setting to reassign the buttons to launch applications or execute
commands.
Changing Button Assignments
1. Touch > Settings > Personal > Buttons .
Note: The buttons that appear on this window are the only buttons that can be programmed via the Buttons setting.
You cannot add buttons to this window.
2. To change button assignment, touch on the name of the button in the Button column, and then
select a program or command in the Assign a program drop down list.
3. Touch OK to save.
4. Press the button to verify that the program is launched or action performed.
Available Applications
The Assign a program list contains the applications installed on the terminal. If there is a program
installed that you would like to see in this list, paste a Shortcut to the program in the \\Windows\Start
Menu\Programs folder. For instructions about creating shortcuts, see Using File Explorer on page 7-6.
7 - 5