Chapter 13 - Dolphin 60S Mobile Charger Devices; Overview; Charging Overview; Mobile Charger Components (60S-Mc) - Honeywell Dolphin 60s User Manual

13
Dolphin 60s Mobile Charger Devices

Overview

The Dolphin Mobile Charger is designed specifically for in-premise and in-transit data collection applica-
tions. The 60s-MC features a cigarette lighter adapter. The 60s-DEXKIT features a cigarette lighter and
DEX cable. The 60s-DB9KIT features a cigarette lighter and DB9 cable.
The 60s-MC, 60s-DEXKIT, and 60sDB9KIT chargers are designed for use with Dolphin 60s model
terminals.
We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell
peripherals, cables, or power adapters may cause damage not covered by the warranty.

Charging Overview

The charger provides power to the intelligent battery charging system in all terminals that senses when a
full charge has been achieved and switches to a trickle charge to maintain the full charge. The charger
completes a full charge of the main battery in 6 hours for the extended battery pack.
Note: Before attempting to use, charge, or replace the battery in the terminal, you should read the
Battery Pack Use and Disposal
We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in
damage not covered by the warranty.

Mobile Charger Components (60s-MC)

Terminal Charging
Power Adapter
The mobile charger is provided with a power adapter cable that can be connected to a vehicle
cigarette lighter outlet.
UL listed power supply
Input: 10V - 30VDC, 0.43A(30V) - 1.28A(10V)
Output: 4.75V - 5.25VDC, 0 - 2A
Verify that the power source is always within the specified range and observe correct
input voltage polarity. An improper input voltage range or reverse polarity could damage
the power conversion circuitry.
on page 3-13.
Well
Guidelines for
Power Adapter
13 - 1