Set Channel Names - Bosch INTEGRUS Installation And Operating Manual

INTEGRUS | Digital Infra-red Language Distribution System
Menu Items
4C Ch. Quality
*
Per Channel Settings:
menu Item Options
4C Channel nn Channel nr.:
00 ... 31
Quality:
- Disabled
*
- Mono SQ
- Mono PQ
- Stereo SQ
- Stereo PQ
Input:
00 ... 27

2.5.10 Set channel names

Each channel can be assigned a name via the Channel Names menu (4E). This can be 'Floor' or one of 30 pre-defined ISO
language names. Also up to 32 user defined names can be added. See also example 2 in section 0.
The language in which the pre-defined names are presented can be chosen via the Language List menu option (4D).
Menu Item Options
4E Ch. Names ...
4E Channel nn Channel nr.:
00 ... 31
Language name:
*
- 'Floor'
- ISO language names
- User defined names
Menu Items Option
4D Language List Language:
*
- English
- French
- Original
Option
Quality:
- All Mono SQ
- All Mono PQ
- All Stereo SQ
- All Stereo PQ
- Per Channel ...
Description
Set all channels to mono, standard quality.
Set all channels to mono, premium quality.
Set all channels to stereo, standard quality.
Set all channels to stereo, premium quality.
Select this option to go to the 'Per Channel Settings' menu.
Description
Select which channel to configure.
Disable selected channel.
Set selected channel to mono, standard quality.
Set selected channel to mono, premium quality.
Set selected channel to stereo, standard quality.
Set selected channel to stereo, premium quality.
An asterix (*) is shown when the selected quality mode is not possible,
because the total bandwidth of the carrier will be surpassed (see
section 1.2.4).
Select the audio input that should be distributed on the selected
channel. For stereo signals the input number of the left signal (even
number) should be selected. (Not more than 28 inputs can be
rerouted.)
Description
Push the button to go to the sub-menu.
Select which channel to name.
Set the name for the selected channel.
Use this name for the channel that carries the 'Floor' language.
Choose from pre-programmed ISO language names.
Up to 32 user defined names (max. 12 characters) can be added and
chosen.
Description
Present language list in English.
Present language list in French.
Present each language name in it's original language (e.g. English,
Français, Deutsch, etc.)
BOSCH Security Systems | February 2003
en |
39