Connections; Connecting The Dcn System - Bosch INTEGRUS Installation And Operating Manual

INTEGRUS | Digital Infra-red Language Distribution System

2.3 Connections

This chapter gives an overview of typical system connections using the LBB 4502 transmitter:
N

Connecting the DCN system

N
Connecting other external audio sources
N
Connecting an emergency signal switch
N
Connecting to another transmitter
2.3.1 Connecting the DCN system
The transmitter requires the DCN Interface Module (LBB 3423) to interface with the Digital Congress Network (DCN). This
module must be mounted in the transmitter housing (see section 2.2.2).
The connections between DCN units and the transmitter are made in a loop-through configuration via the DCN 6-pole circular
connectors on the module's rear panel. See the DCN Installation and Operating Manual for more information.
Figure 2.8 Connecting the DCN systems to the Modular IR transmitter
BOSCH Security Systems | February 2003
en |
27