Attaching The Rack-Mount Brackets For The Catalyst 2960-X Switches - Cisco Catalyst 2960X-48FPD-L Hardware Installation Manual

Switch Installation

Attaching the Rack-Mount Brackets for the Catalyst 2960-X Switches

Procedure
Use two Phillips flat-head screws to attach the long side of the bracket to each side of the switch.
Figure 17: Attaching Brackets for 19-inch Racks
1 Front-mounting position
2 Number-8 Phillips flat-head screws (48-2927-01)
OL-28309-02
3 Mid-mounting position
4 Rear-mounting position
Catalyst 2960-X and 2960-XR Switch Hardware Installation Guide
Rack-Mounting
35