Console Leds; Ethernet Management Port Led; Rear Panel - Cisco Catalyst 2960X-48FPD-L Hardware Installation Manual

Product Overview
When you select the STACK LED, the respective STACK LEDs are green when the stack ports (on the switch
rear panel) are up, and the respective Stack LEDs are amber when the ports are down. SFP+ module port
LEDs 1 and 2 on the switch show the status for stack ports 1 and 2, respectively.
If the port LEDs are green on all the switches in the stack, the stack is operating at full bandwidth. If any port
LED is not green, the stack is not operating at full bandwidth.

Console LEDs

The console LEDs show which console port is in use. If you connect a cable to a console port, the switch
automatically uses that port for console communication. If you connect two console cables, the USB console
port has priority.
Table 9: RJ-45 and USB Console LEDs
LED
RJ-45 console port
USB console port

Ethernet Management Port LED

Table 10: Ethernet Management Port LED
Color
Green
Off
Amber

Rear Panel

The rear panel of the Catalyst 2960-X switches have a FlexStack-Plus module slot, a fan exhaust, an RPS
connector, and an AC power connector.
OL-28309-02
Color Description
Green RJ-45 console port is active.
When this LED is on, the USB console port LED is off.
Off The port is not active, and the USB console port is active.
Green USB console port is active.
When this LED is on, the RJ-45 console port LED is off.
Off The port is not active, and the RJ-45 console port is active.
Description
Active link to PC.
Inactive link.
POST failure.
Catalyst 2960-X and 2960-XR Switch Hardware Installation Guide
Rear Panel
15