Cisco Catalyst 2960X-48FPD-L Hardware Installation Manual page 44

Rack-Mounting
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions
Warning
to ensure that the system remains stable. The following guidelines are provided to ensure your safety:
• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the
heaviest component at the bottom of the rack.
• If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing
the unit in the rack.
Statement 1006
This figure shows the standard 19-inch brackets and other optional mounting brackets. You can order the
optional brackets from your Cisco sales representative.
Figure 16: Rack-Mounting Brackets
1 19-inch brackets
2 ETSI brackets
Catalyst 2960-X and 2960-XR Switch Hardware Installation Guide
34
3 23-inch brackets
4 24-inch brackets
Switch Installation
OL-28309-02