Irps Led; Master Led; Port Leds And Modes - Cisco Catalyst 2960X-48FPD-L Hardware Installation Manual

Product Overview
Color
Blinking amber

IRPS LED

The IRPS LED is only available on Catalyst 2960-XR switches.
Table 5: IRPS LED
Color
Off
Green
Amber
Blinking amber

Master LED

This table describes the master LEDs.
Table 6: Master LED
Port Mode
Off
Green
Amber

Port LEDs and Modes

The port and module slots each has a port LED. As a group or individually, the LEDs show information about
the switch and about the ports.
OL-28309-02
RPS Status
The power supply in a switch has failed, and the RPS is providing power to the switch
(redundancy has been allocated to this device).
RPS Status
Second power supply is not present.
Both power supplies are present and operating.
The second power supply is present, but the input is not connected.
The second power supply is present, but the signal is faulty.
Description
Switch is not the stack master.
Switch is the stack master or a standalone switch.
An error occurred when the stack was electing the stack master switch, or another type of
stack error occurred.
Catalyst 2960-X and 2960-XR Switch Hardware Installation Guide
LEDs
11