Console Leds - Cisco Catalyst 6800IA Hardware Installation Manual

LEDs
This figure shows the LEDs on the first switch, which is stack member number 1.
Figure 4: STACK LED
1
2
When you select the STACK LED, the respective STACK LEDs are green when the stack ports (on the switch
rear panel) are up, and the respective Stack LEDs are amber when the ports are down. SFP+ module port
LEDs 1 and 2 on the switch show the status for stack ports 1 and 2, respectively.
If the port LEDs are green on all the switches in the stack, the stack is operating at full bandwidth. If any port
LED is not green, the stack is not operating at full bandwidth.

Console LEDs

The console LEDs show which console port is in use. If you connect a cable to a console port, the switch
automatically uses that port for console communication. If you connect two console cables, the USB console
port has priority.
Table 8: RJ-45 and USB Console LEDs
LED
RJ-45 console port
Catalyst 6800IA Switch Hardware Installation Guide
10
Stack member 1
Stack member 2
Color
Green
Off
3 Stack member 3
Description
RJ-45 console port is active.
When this LED is on, the USB console port LED is off.
The port is not active, and the USB console port is active.
Product Overview
OL-30278-02