Adf Output - Fujitsu ScanPartner 15C User Manual

2 2 . . 4 4 A A D D F F O O u u tput Tray (Figure 2-5)
i). Hold the output paper tray approximately 30 degrees aslant as shown in Figure 2-5.
ii). Insert the three tabs on the output paper tray to the three slots on the ADF.
iii). Release the paper tray gently. Make sure the tray is firmly attached to the ADF.
iv). Pull out the output paper tray extension wire to the desired length.
Figure 2-5 Install the ADF Output Paper Tray
Extensions
2-6