Handling Recordings; Protecting Recordings; Checking Authenticity; Archive Recordings To A Pc Hard Disk - Bosch Divar Operation Manual

Divar Control Center | Operation Manual | Handling recordings

Handling recordings

Protecting recordings

Click the Protect button to prevent the selected recording in the Overview or
Search tab from deletion or from being overwritten.
•
Type a name for the protected recordings in the window that appears.
•
The default name is the start date and time, for example,
•
A maximum of 1000 protected recordings can be set.
•
If you choose to protect a search result item, a default time range is initially
displayed. The start time defaults to 30 seconds prior to the event. The end
time defaults to 1 minute after the start time.
•
The disk space indicator shows the estimated percentage of the protected
region on the disk after this protect operation is completed.

Checking authenticity

1. Select a video recording.
2. Click Check to verify the authenticity of the selected video.
> An information window indicates the authenticity of the selected video.
For authenticity verification of individual frames, click in the respective cameo.
This opens the Authenticity information window. This window shows the details
of the video frame in the respective cameo at the time the icon was clicked.
Click OK to close the window.
Bosch Security Systems

Archive recordings to a PC hard disk

Recordings that are archived to the local PC hard disk are in a special Divar file
format. The Archive Player required to playback the archive is copied
automatically from the Control Center to the location where the archive is
stored. The video is archived in its native format, keeping its proof of
.
20021114 173125
authenticity.
To store recordings from a selected period on a PC hard disk:
1. Select a recording period in the Overview, Search or Protected tab screens.
2. Click Archive.
> The Archive pop-up window appears.
3. To change the default location, browse to the location in the PC file system
where you want to store the archive file.
4. To change the file name, type a new name for the file.
5. Select which cameras you wish to archive in the confirmation window that
appears.
> All cameras are included by default.
6. To change the selection start and end date/time, enter new values in the From
and To boxes.
> The approximate size of the archive file is shown. Ensure that you have sufficient
space to store this file.
7. Click Archive to start saving the archive file.
During archiving, a progress bar monitors the archiving process. All controls are
unavailable during the archiving process.
EN | 24