Bosch Divar Operation Manual page 23

Divar Control Center | Operation Manual | Finding recordings for playback
Setting the search period
Enter the date and time in the From and To boxes to define the period you
want to search.
> The To box shows the time and date of the latest recording and the
the earliest recording by default.
> Click one of the video synchronization icons
picture to the time entered.
Goto function
If you enter a date and time in the From box and then click a playback control,
playback starts at the time and date entered.
Camera selection
Click a camera selection button to select the camera you want to search.
Search direction
Select Forward to search from start time to end time or Backward to search
from end time to start time.
Sensitivity
Adjust the Sensitivity slider to set the level of motion that will be detected.
The highest value detects even the slightest motion.
Area
Select either Add, Remove or Toggle to determine how an area on the
screen reacts when you click it. You can also select all areas or clear all areas.
Show motion
Select Show motion to draw attention to any motion that occurs in the
designated zones.
Show grid
Select Show grid to outline zones on the picture.
Bosch Security Systems
Start search
Search results
From box
When the search is completed, a list of video clips that fulfill the filter criteria is
or to set the displayed
displayed. This list shows the most recent event recordings at the top, the oldest
at the bottom.
1. Click on a column header to sort the list according to that column item. Click a
2. Use the scroll bar to examine the full list.
3. Click on an entry in the list to select it.
4. Use the playback controls to start the playback of the selection.
Click Start search to start the search.
second time to sort the list in reverse order.
> Playback of the selected item starts in the playback window.
EN | 21