Finding Recordings For Playback; Selecting A Camera; The Playback Viewing Window - Bosch Divar Operation Manual

Divar Control Center | Operation Manual | Finding recordings for playback

Finding recordings for playback

The playback window is shown when you click Playback. The playback window
has five tabs:
•
The Overview tab gives you a graphical overview of the video stored on the
unit.
•
The Search tab allows you to search for recordings based on alarm and
motion events.
•
The Smart Motion Search tab allows you to search for recordings based on
motion in designated areas of a particular camera picture.
•
The ATM/POS tab allows you to search for recordings of transactions based
on a text string.
•
The Protected tab allows you to manage protected recordings.

Selecting a camera

Select a Divar from the Playback Divar drop-down menu at the top right of the
screen. (If you select a Divar without an icon
Double-click a numbered camera icon to select it.
Camera icons are shown in the top right of the screen in playback mode only.
The camera icons show the number of the camera connection. The status and
type of camera is indicated by the type of icon used.
Camera selected - Indicates the active camera (yellow icon).
Camera not selected - Shows camera is available for selection.
Camera not available - The camera is not physically connected or a user
is blocked from using this camera by the
administrator.
Bosch Security Systems
, the Login window appears.)

The playback viewing window

Selecting the playback viewing window size
The playback viewing window has two sizes, normal and enlarged. Normal size
contains the search criteria and results with the video in the upper left quadrant
of the screen. With the enlarged size, the video occupies all of the center screen.
Click the playback window size icon
sizes.
Selecting single or multiscreen views
In a normal sized playback window:
1. Click the single icon to view the images from one camera.
2. Click the quad icon to view the images of four cameras.
> The 3x3 and 4x4 modes are not selectable.
In an enlarged playback window:
1. Click one of the camera view icons
display configuration.
> Single, quad, 3x3 and 4x4 multi-image display modes are available.
2. To manually cycle through the available quad views, click the quad icon.
EN | 15
to switch between normal and enlarged
to change the multiscreen