Starting Instant Playback; Assigning A Camera To A Monitor; Using Audio Mode; Displaying Metadata (For Nvr Recordings Only) - Bosch LTC-1311-20 Operator's Manual

Bosch Video Management System
To display information:

5.16

Starting instant playback

Main window >
You can view the recordings of a camera in an Image pane in the Live Mode.
The start time (number of seconds in the past or rewind time) for instant playback is
configured in the Options dialog box (Extras menu, Options... command).
To start instant playback:
1.
2.
5.17

Assigning a camera to a monitor

Main window >
You can assign IP devices to a decoder. This displays the video signal on the analog monitor
and plays the audio signal on the speakers if connected to the decoder. DiBos and Bosch
Allegiant cameras cannot be assigned this way.
To assign a camera image to a monitor:
1.
2.
5.18

Using audio mode

Main window
If available you can activate audio for a selected camera.
To hear the audio signal of multiple cameras simultaneously, activate multichannel audio
mode.
You switch the audio mode in the Options dialog box (Extras menu, Options... command).
To activate / de-activate audio:
1.
2.
5.19

Displaying metadata (for NVR recordings only)

Main window >
You can display metadata of the selected camera such as ATM / POS / Barcode if available.
To display metadata in a separate window:
1.
Bosch Sicherheitssysteme GmbH
Right-click an Image pane with a camera assigned and click Properties.
A dialog box with the camera properties is displayed.
Select the required Image pane.
Click .
The recording is played.
To return to live image, click
More than one Image pane with instant playback is possible, even multiple instant
playbacks of the same camera.
>
Click the tab and the
Drag a camera from the Logical Tree window to the desired monitor.
Select an Image pane.
Click to de-activate or
Select an Image pane.
Operator's Manual
.
tab
tab.
to activate audio.
Displaying camera images | en
Operator Client | V3 | 2010.07
17