Viewing Live Images; Assigning Cameras To Cameos; Making Groups - Bosch Divar Operation Manual

Divar Control Center | Operation Manual | Viewing live images

Viewing live images

Assigning cameras to cameos

A cameo is a single camera picture in a multiscreen display. A camera picture
can only be shown in one cameo at a time.
To assign a camera to a cameo:
1. Click one of the camera view icons
multiscreen view.
Bosch Security Systems
2. Click on a Divar.
> Log in if necessary.
3. Click on the + beside the Divar name.
> A list of connected cameras appears.
4. Click on the cameo where you want that camera picture to be shown.
> A yelow border appears around the cameo.
5. Double click on a camera.
> The camera picture appears in the cameo.
You can also drag and drop cameras into cameo positions.
To undo a cameo assignment:
1. Click on a cameo.
2. Click Remove
> The cameo is blank when the camera assignment is removed.

Making groups

A group is used to make a logical set of Divars, cameras or views that can easily
be recalled. For example, all Divars at a specific building, or all cameras on one
floor of a building. Groups can be nested and arranged so that you can
immediately recall a logically named set. Views are placed under groups.
To make a new group:
1. Select the position in the tree where you want the new group to appear.
> Select the root icon to create a top level group.
> A new group can also be nested under an existing group.
2. Right click the tree item and select Add Group.
to select a
3. Enter a name for the new group.
4. Repeat this procedure to add more groups.
5. Drag and drop the Divars, cameras and views you want in that group.
.
EN | 10