Capturing A Still Image; Overview Tab - Bosch Divar Operation Manual

Divar Control Center | Operation Manual | Finding recordings for playback
Step backward
The step icon is only enabled in the still mode.
1. Click Step backward to move the image one frame back in time.
2. Hold it down to continue stepping.

Capturing a still image

You can capture still images from the fullscreen display of a camera and save
them to the PC hard disk in a bitmap format.
To save an image from the active cameo to the PC hard disk:
1. Click the single icon to view the images from one camera.
2. Click the snapshot icon .
> The Snapshot pop-up window appears.
3. To change the default location, browse to the location in the PC file system
where you want to store the image file.
4. To change the file name, type a new name for the file.
5. Click Save.
The snapshot has a resolution of 720x484 pixels in NTSC and 720x576 pixels in
PAL. Authentication information is shown under the image.
Bosch Security Systems

Overview tab

The overview tab window provides a graphical representation of the video
recorded on the Divar storage system. You can playback this video or make a
selection for protection, authenticity checking, archiving, export or deletion.
Using the overview tab
Earliest and latest recording times
•
The Earliest box indicates the date and time of the oldest recording on disk.
•
The Latest box indicates the date and time of the most recent recording on
disk.
Disk space used
A usage bar indicates the percentage space of the Divar storage system that has
been used. Dark blue indicates the percentage space used in total. Light blue
indicates the portion that is protected against overwriting. When in linear
EN | 17