Bosch Divar Operation Manual page 8

Divar Control Center | Operation Manual | Getting started
Login
When you start the Control Center application, the Login window appears.
(Click Cancel to discontinue login and exit the application.)
To log in to a particular Divar:
1. Select the Divars you want to log in to by placing check marks next to them.
> Click to either select all or none of the Divars listed.
> If a login group has been defined, you can select this group to log in to the Divars
listed in the group.
2. Type your user name and password.
> The user name and password to be filled-in are set in the System settings/
Connectivity/Network access menu of the Divar itself. Check with your
administrator if you do not have access to the unit.
> To let the system remember your name and password on subsequent uses of the
Control Center, place a check mark in the
Administrator passwords are not saved.
3. Click Login.
Bosch Security Systems
Save login information
box.
Maximum number of users
The administrator can force off a user if the maximum number of users on a
single Divar is reached. A list shows all users that are currently logged in.
To disconnect a user:
1. Select a user in the list.
2. Click Yes.
The software included with the product allows up to six users to log in at a time.
If you are unable to log in, consult your administrator.
EN | 6