Selecting Divars, Cameras, Groups And Views - Bosch Divar Operation Manual

Divar Control Center | Operation Manual | Introducing the main window

Selecting Divars, cameras, groups and views

In the live mode, use the System Management window to select a Divar and
open a list of connected cameras, or to set up groups of cameras and views and
to recall them. These items are presented in a tree structure. In the tree
structure, click + to expand a list; click - to collaspe a list.
Task menu
Right click an item in the tree to open a task menu:
•
Place a check mark next to Show Login Groups or Show Logical Groups
to see these items in the tree structure.
•
Save the tree structure you have made to a file (Save).
•
Load a tree structure that you have already saved to disk (Open).
•
Make new groups and views, rename them or delete them.
•
Copy logical groups (Save as . . . ).
Bosch Security Systems
•
Log in to or log off from a connected Divar or an entire group of Divars.
•
Acknowledge alarms on a particualar Divar.
•
View the properties of the selected Dviar, camera or camera view.
Drop-down menu
To jump directly to a top level group use the drop-down selection box to select a
group from the list (ensure that Show Logical Groups is selected in the task
menu).
System Management icons
Available Divars - Contains a list of all Divars defined on the
network.
Individual Divars - Shown in bold if you are logged in.
Available cameras - Shows camera inputs available on a Divar.
Connected cameras are displayed in bold.
Controllable cameras - Shows controllable cameras connected to the
Divar.
Groups - Identifies a group.
Views - Identifies a view.
EN | 9