Live Performance Set-Up And Conference Set-Up - Bosch LBB 1968 Installation And Operating Manual

Plena Feedback Suppressor | Installation and Operating Manual |

3.1.2 Live performance set-up and Conference set-up

See fig. 3.2 and fig. 3.3, respectively.
The Plena Feedback Suppressor is provided with one balanced XLR-line input (1) and one unbalanced line input
(15), e.g. to connect a line level source such as an SR-mixer or a DCN Central Control Unit (please refer to the
Operation Manual of your DCN System).
To connect any unit that accepts standard line signals, the unit is provided with one balanced XLR-line output (7)
and one unbalanced line output (6).
• Set the Mic/Line switch (3) to 'Line' to use the balanced line input (1). In this case the phantom power switch (16)
has no function.
Mic 1/Line In
Mic/Line
1 3
figure 3.2: Live performance set-up
Bosch Security Systems | 2003-11 | 9922 141 81681en
7
16 15
Mic 2 In Line
Line Out
In
On Off
Out
Phantom Mic 1+2
6
External settings and connections
Switch On Off
1 Music mode Speech mode
2 Dualinputvoicetracking Single input
Mic1In + Mic2In Mic2/Line In
3 Process with bass lift Process flat
4 Accurate mode Fast mode
High Med. Low
LBB 1968/00 8900 196 80001
Plena Feedback Suppressor
115/230V~,50/60Hz
N663
S/N.
Design & Quality
The Netherlands
Signal Level
Warning
1 2 3 4
This apparatus must be earthed
en | 12
LBB1968
115V~ 230V~
Apparatus delivered
connected for 230V-
Rated input
Power: 50VA
T500L250V