Taking Phone Calls; Test Instructions - Bosch Carephone 62 User Manual

40 en | Operation
8.3

Taking Phone Calls

The Carephone 62 can be programmed so that you can take
phone calls using the emergency call button on the unit or using
the wireless transmitter. The programming step 61 must not be
set to 0. See programming step 61 Incoming call recognition.
Taking phone calls with the Carephone 62
–
–
Taking phone calls with the wireless transmitter
–
–
8.4

Test instructions

Make sure to perform a test regularly, by sending a manual test
alarm with the wireless transmitter. This will test the wireless
connection between the transmitter and the Carephone 62, and
will also test the connection of the Carephone 62 to the
monitoring center. This must be done at least once a week.
Perform a test
–
–
F.01U.141.162 | V3 | 2012.11
To take a phone call with the Carephone 62, press the
emergency call button when the phone rings.
To terminate the call, press the emergency call button
again.
To take a phone call with the wireless transmitter, press
the button of your wireless transmitter when the phone
rings.
To terminate the call, press the button of your wireless
transmitter again.
Press the button of the wireless transmitter.
The Carephone 62 should call the monitoring centre.
User Manual
Carephone 62
Bosch Security Systems