Bosch Carephone 62 User Manual page 22

22 en | Programming
28 Call forwarding
It is possible for the monitoring centre (if it supports this functionality) to
ask the Carephone 62 to forward the current call to a new destination
using a specified protocol. This step is used to allow the Carephone 62 to
use the specified protocol, or to force it to use telephone protocol. This
function is only possible with protocols RB2000E (target 0), CPC (target 3)
and RBIP (target 9).
– 0 = forwarding to another number, 1 = forwarding to a telephone.
Default value is 0.
29 Hear/speech impaired
This function is dedicated to users with speaking or hearing difficulties.
Once a connection to the monitoring centre has been established, the
signaling device is activated to advise the user that he or she is through to
the monitoring centre (the centre is listening). If the user now presses the
emergency call button again, the message emergency call is sent to the
monitoring centre. If the stop button is pressed, then the recorded
message (e.g. "everything is okay") is sent to the monitoring centre.
– 0 = off, 1 = on (see also programming step 72). Default value is 1.
30 Device number
When an emergency call is made, this number is sent to the monitoring
centre. The number can be up to 12 digits long. Numbers 0000, 9998, 9999
and 999999 may not be used. Default value is 1248.
31 Sign in / sign out
To specify whether the sign in or sign out of the activity monitor will
initiate a call to a call recipient, choose:
– 0 = without call, 1 = with call. Default value is 0.
32 Call progress tones audible
You can choose to hear the call progress tones when the Carephone makes
a call.
– 0 = not audible, 1 = audible. Default value is 0.
F.01U.141.162 | V3 | 2012.11 User Manual
Carephone 62
Bosch Security Systems