Connecting The Carephone 62; Pstn Or Gsm Connection - Bosch Carephone 62 User Manual

Carephone 62
Wall mounting
You can set the Carephone 62 to the wall either using a wall
bracket that can be ordered as an accessory, or you can fix the
unit directly to the wall without a bracket. The wall bracket
stabilizes the Carephone 62 and makes installation easier.
See Section A.3 Wall mounting, page 48.
5.3

Connecting the Carephone 62

5.3.1

PSTN or GSM connection

1.
2.
3.
CAUTION!
Only connect the unit to a phone outlet that has been correctly
installed by your telephone service provider. The Carephone 62
is designed to be connected to the public telephone network.
4.
All the indicator lamps light up for approx. 2 seconds, this is a
battery test. The unit offers a choice of languages and after
selection enters standby mode (see Section 6.2.4 Programming
steps, page 19). The unit can now be programmed.
Bosch Security Systems
Insert the plug of the telephone cord into the socket (1) on
the Carephone 62. Feed the cords through the cable
channels and through the opening on the back of the unit.
Fit the plug of the telephone cord into the socket of your
telephone outlet or GSM gateway.
Insert the plug of the main power adapter into the socket
(2) on the Carephone 62.
Plug the power adapter into the line power outlet.
User Manual
Installation | en
F.01U.141.162 | V3 | 2012.11
15