Microscan HS-1 User Manual page 11

Check Hardware
USB Virtual Comm
• Attach the RJ45 end of the scanner cable to the bottom of the handle.
• Attach the USB end of the cable to a USB port on the host computer. The host computer
will detect the device and prompt you to install drivers.
• Download drivers from the Microscan Download Center at
follow the installation instructions included with the drivers.
• Read the symbols below in the order provided to set the scanner to USB Virtual Comm
Mode.
1
2
USB Virtual Comm Mode
1-4
Bar Code
Configuration
Mode
3
Save Settings
HS-1 Handheld Scanner User's Manual
www.microscan.com and