Turning The System Off - Bosch Security System Owner's Manual

Turning the System Off

Turning Off Multiple Areas with a Passcode
This function is useful for turning off multiple areas with a few keystrokes. It is quicker than
disarming several areas independently. Your passcode must have the proper authority level for each
area.
When an area is turned on (armed), you must enter a door programmed for entry delay time.
Opening the door, starts the entry delay time. Failing to turn the system off before the entry delay
time expires or entering through a door not programmed for entry delay time, causes an alarm.
If this happens, silence the alarm by entering your personal passcode and pressing [ENT]. Call
your security company to let them know that it is not an emergency situation.
Turning Off Multiple Areas with Disarm All
This function turns off multiple areas with a few keystrokes. It is quicker than disarming several
areas independently. Your passcode must have the proper authority level for each area. This
function works the same as entering your passcode to disarm, but allows the Disarm All feature to
be included in the Command Menu.
When an area is turned on (armed), you must enter a door programmed for entry delay time.
Opening the door, starts the entry delay time. Failing to turn the system off before the entry delay
time expires or entering through a door not programmed for entry delay time, causes an alarm.
If this happens, silence the alarm by entering your personal passcode and pressing [ENT]. Call
your security company to let them know that it is not an emergency situation.
1. Press the [ESC]/[MENU] keys to enter the Command Menu.
2. Press the [NEXT] key until the DISARM ? function is displayed. Press [ENT]. Your
system may require a passcode before allowing you to execute the Disarm All function.
ENTER PASSCODE appears in the display. Enter your passcode and press [ENT].
3. DISARM ALL ? is displayed. Press [ENT] to disarm all areas. The command center
displays DISARM 12345678, indicating that all areas are being turned off. The actual
number of areas you may turn off is limited by command center scope and/or your
authority level. For example, if you have authority to disarm all 8 areas but the scope of
the command center you're using is limited to areas 1, 2, and 5, then you will only be
able to turn off areas 1, 2, and 5.