Bosch Security System Owner's Manual page 27

DEL PASSCODES ?
Description
Use this function to delete a personal passcode from your system without assistance from your
security company. You need to know the user number for the passcode you want to delete.
The two digit user numbers identify users in reports transmitted from your system.
Using Del Passcodes:
1. Ensure your command center is at idle text.
2. Press the [COMMAND] bar. The display shows SYSTEM COMMAND.
3. Press the [5] key, then press the [3] key.
Note: If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function.
Press the [MENU] key to enter the Command Menu, then press [NEXT] repeatedly until you
reach the DEL PASSCODES ? prompt. Press [ENT].
4. The command center displays ENTER USER NUM. Enter the two-digit user number, not the
passcode. Press [ENT].
• If you enter a user number not programmed into the system, NOT IN USE displays.
Check the user number and enter again.
5. DELETE USER ## ? displays. Press [ENT] to delete the passcode for this user.
6. The command center briefly displays PASSCODE DELETED and then returns to idle disarmed
text.
53