Connections - Multitech FaxFinder FF130 Administrator User Manual

Connections

Below you will find the back panels for the FaxFinder family of products, starting with the 1-port FF130
the 8-port FF830, from top to bottom respectively. Following that is the description of the connections
corresponding to the number labels for assistance with the connections.
1. Line Ports. PSTN/POTS RJ 11 phone line connectors.
2. LAN/Ethernet Port. RJ 45 receptacle for network connection. The FaxFinder 130/230 units for
reasons of space constraints are labeled LAN, while the FF430/830 units show Ethernet.
3. Console/Command Port. DB 9 connection for serial access and control of the FaxFinder units.
4. Reset. Access hole for reset button (use a straightened paper clip or similar tool to push the
recessed button).
Pushing and releasing the button once will reboot the FaxFinder.
Holding the button down for 3 seconds will reset the FaxFinder to factory defaults.
5. Power Connector. Threaded connector for the provided power supply.
6. Power Socket. Power receptacle for provided power cord.
7. Power Switch. On/Off power switch for the FaxFinder 430/830 units.
Console/Command Port Pin Assignments
Multi-Tech Systems, Inc.
Pin 1 CD
Pin 2 RCV
Pin 3 XMT
Pin 4 DTR
Pin 5 Ground
Pin 6 DSR
Pin 7 RTS
Pin 8 CTS
Pin 9 Ring
FaxFinder Admin User Guide
Chapter 2: Getting Started
12