Time - Multitech FaxFinder FF130 Administrator User Manual

Chapter 3: FaxFinder Web Management Interface

Time

Correct time settings are important for logging and verification purposes. This section allows you to
enter a preferred time server as well as your preferences for time and date display format.
Time Server
Select a time server from the choices available in the drop-down box or you may also select 'none.'
When you select None, the Time and Date settings are no longer grayed-out and are available for you to
set the current time.
Add Time Server
Here you may enter the name or address of a time server different from those available in the drop-
down list.
Synchronize Every
Enter the interval of time that you want the FaxFinder to synchronize with the time server. This is only
valid if you have selected a time server.
Time Zone
Select the time zone where the FaxFinder will be located from the drop-down list. Changing the time
zone requires a reboot of the FaxFinder for it to take effect. A pop-up will alert you that a reboot will be
performed, to which you may select cancel if you do not want to reboot at this time.
Date Format
Select the format that you want the date to be presented in. Key: 'M' is for month, 'D' is for day and 'Y'
is for the year.
Time Format
Select the time format that you want information presented in (options are 24 or 12 hour).
Time (24 hour) hh:mm:ss
Enter or verify that the time is what you expect it to be. Key: 'H' is for hour, 'M' is for minute and 'S' is
for seconds. This is only for when the Time Server has been set to "None."
Date mm/dd/yyyy
Enter or verify that the date is what you expect it to be. Key: 'M' is for month, 'D' is for day and 'Y' is for
the year. This is only for when the Time Server has been set to "None."
Save button
When you have entered your information, be sure to click the save button before navigating away from
this page, else your changes will be lost.
Multi-Tech Systems, Inc. FaxFinder Admin User Guide
31