Configuring Exceptions - HIKVISION DS-7600NI-SE/P Series User Manual

DS-7600 Series NVR User's Manual
1. Enter the Trigger menu by going to Menu > Recording Configuration > Trigger.
2. Select the Alarm Output tab, as shown in Figure 72.
3. Select the Alarm Output No. in the dropdown list.
4. Edit the Alarm Name.
5. Select the Dwell Time.
6. Setup arming schedule for the alarm output by click the Set button. Choose one day in a week and
set an arming schedule. If the schedule can also be applied to other days, click Copy. Click Apply
to save the settings and back to the Alarm Output interface.
7. If the same setting can also be applied to other alarm output, click Copy.
8. Click Apply to save the settings.
9. You can check the alarm output status in the Alarm Output Status list in the Alarm Output
interface.

Configuring Exceptions

Actions can also be triggered when the NVR detects certain exceptions. To setup exception configuration:
1. Enter the Exception menu, shown in Figure 73 by going to Menu > System Configuration >
Exception.
Figure 72 Alarm Output Settings Menu
73