Starting Up And Shutting Down Your Nvr; Startup Your Nvr; Shutdown Your Nvr; Rebooting Your Nvr - HIKVISION DS-7600NI-SE/P Series User Manual

DS-7600 Series NVR User's Manual

Starting Up and Shutting Down Your NVR

Proper startup and shutdown procedures are crucial to expanding the life of your NVR.

Startup Your NVR


Ensure the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an
Uninterruptible Power Supply (UPS) be used in conjunction with the unit.
 Connect the NVR to a VGA/HDMI monitor. You will only see the NVR menu system when it's
connected to a VGA/HDMI monitor.

Press the POWER switch on the back rear panel. The unit begins to start up.

Shutdown Your NVR

1. Shutdown your NVR by going to Menu > Maintenance, click
up the Shutdown menu, as shown in Figure 7.
2. Select the Shutdown button.
3. Click the Yes button.
4. When an attention message with words: Please power off, shown in the windows, press the
POWER switch to power off.

Rebooting Your NVR

While in the Shutdown menu (Figure 7), you may also reboot your NVR by clicking Reboot.

Locking Your NVR

Locking your NVR will return you to the Live Feed mode, which will require the correct user name and
password to exit out of it and do operation. You have two methods to lock your NVR.

Enter the Shutdown menu by going to Menu > Maintenance > Shutdown, and click the Lock
button.

Click
Note:
You can also set auto lock time to lock the menu for a certain period of time inactivity. Enable auto
locking by going to Menu > System Configuration > General > More Setting, and select auto lock time in
the Auto Locktime dropdown list.
Figure 7 Shutdown Menu
on the lower left corner of Menu interface to lock your NVR.
in the lower left corner to pop
19