Step 4. Connect The Thermostat Wiring - Daikin ENVi Installation Manual

P1 Terminal on DPCA
D-
D+
C
R
Daikin ENVi Thermostat
12
Step 4. Connect the Thermostat
Wiring
Use the field-supplied 4-wire low-voltage cable
to connect the thermostat to the DPCA.
To connect the thermostat to the DPCA:
1. Connect the wires as shown:
D- D+
2. Attach the Daikin ENVi thermostat to the
backplate. Ensure that the pins on the
thermostat align with the terminal block on
the backplate.
Optional Auxiliary Heater
AUX
C R AUX
R
24VAC
C