Table of Contents
Advertisement
5. T
ECHNICAL
Fogger
Maintenance
Storage
Page 14 of 16
I
NFORMATION
Do not allow the fogger to become clogged. After every 40 hours of continuous
operation, use CHAUVET® Fog Cleaner Quart (FCQ) through the system to prevent the
accumulation of particulate matter in the heating element.
The recommended cleaning procedure is as follows.
1.
Empty all fog fluid from the machine.
2.
Add cleaning solution to tank.
3.
Plug unit in and allow it to warm up.
4.
Run the unit in a well-ventilated area until the tank is almost empty. Do not allow
the pump to run dry.
5.
Refill with fog fluid. Run the machine briefly to clear any cleaning solution from the
pump and heater.
Fog Cleaner Quart (FCQ) was specifically developed by CHAUVET® to clean your
Geyser™ RGB. Make sure you use FCQ regularly to increase the life of your
fogger.
Before storing the product, run FCQ through the system as described in the cleaning
procedure above. This will help to prevent any particles from condensing inside the
pump or heater.
Test-run your Geyser™ RGB on a monthly basis to achieve the best performance.
Geyser™ RGB User Manual Rev. 6
Hide quick links:
Advertisement
Table of Contents
