Mounting; Orientation; Rigging - Chauvet Geyser User Manual

Mounting

Orientation

Rigging

Floor Mounting
Fluid Tank
Position
Page 8 of 16
Before mounting the product, read and follow the safety recommendations indicated in
the Safety Notes.
Primarily, the Geyser™ RGB is to be floor mounted in a vertical fog jet orientation. The
Geyser™ RGB may also be mounted in a floor mounting/horizontal fog jet orientation or
in an overhead mounting/downward fog jet orientation, but follow instructions closely to
avoid tank spills.
When mounting the Geyser™ RGB in any inverted position, remove the fluid tank
from the holder and set it upright on an adjacent surface.
·
Before deciding on a location, always make sure there is easy access to the product
for maintenance and fluid replenishment.
·
Make sure that the structure or surface onto which you are mounting the product
can support the product's weight (see the
·
When mounting the product overhead, always use a safety cable. Mount the
product securely to a rigging point, such as an elevated platform or a truss.
·
When rigging the product onto a truss, you should use mounting clamps of
appropriate weight capacity. Three M12 holes are on the bottom of the product,
which are appropriate for this purpose.
·
The rubber feet also serve as floor supports. When mounting the product on the
floor, make sure that the product and cables are away from people and vehicles.
Floor Mounting
Horizontal Fog Jet
Fluid Line
Vertical Fog Jet
To avoid spillage with any mounting, always position the fluid tank with the tank's
cap in the uppermost position above the tank's fluid line.
Technical Specifications).
Floor Mounting – Vertical Fog Jet
Horizontal Fog Jet
Geyser™ RGB User Manual Rev. 6