3
3
Touch the button for a set (Set 1 to Set 5), and then use the keypad to
type in the address range.
–
The range setting cannot include "0.0.0.0". For example, to specify
all addresses before 192.168.1.20, specify the range from 0.0.0.1 to
192.168.1.20.
–
Touch [Deny Access] to specify the IP addresses to refuse access.
The procedure for setting the IP addresses is the same as on the
Permit Access screen.
–
To edit the values that you entered, touch [←] or [→] to move the
cursor to the desired area, touch [Delete], and enter the new value.
–
To clear all values, press the [C] (clear) key.
4
Touch [OK].
IP filtering is set.
Note
To cancel changes to the setting, touch [Cancel].
3-52
Specifying Settings From the Control Panel
im7520/im6020