3
Program Default
The default screen that appears in the Program tab in Scan mode can be
specified. (Default setting: PAGE1)
1
In the User Setting screen, touch [2 Display Setting].
–
To display the User Setting screen, refer to page 3-7.
2
Touch [3 Scan Basic Screen Default Setting].
3
Touch [Program Default].
4
Touch the button for the desired setting.
–
Touch [
screen.
5
Touch [OK].
Note
To cancel changes to the setting, touch [Cancel].
3-32
Specifying Settings From the Control Panel
] or [
], and then touch the button for the desired
im7520/im6020