Ozone Release - Oce cm4520 Getting Started Manual

Installation and Operation Precautions
For Users in countries not subject to Class B regulations
WARNING
This is a Class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
This device must be used with a shielded network (10 Base-T/100 Base-TX)
cable and a shielded parallel cable. The use of non-shielded cables is likely
to result in interference with radio communications and is prohibited under
CISPR rules and local rules.
LED Radiation Safety
This product is a copier which operates by means of a LED (light emitting di-
odes) exposure system. There is no possibility of danger from the LED opti-
cal radiation, because the LED optical radiation level does not exceed the
accessible radiation limit of class 1 under all conditions of operation, main-
tenance, service and failure.

Ozone Release

Locate the Machine in a Well-Ventilated Room
A negligible amount of ozone is generated during normal operation of this
machine. An unpleasant odor may, however, be created in poorly ventilated
rooms during extensive machine operations. For a comfortable, healthy and
safe operating environment, it is recommended that the room be well venti-
lated.
Placer l'appareil dans une pièce largement ventilée
Une quantité d'ozone négligable est dégagée pendant le fonctionnement de
l'appareil quand celui-ci est utilisé normalement. Cependant, une odeur
désagréable peut être ressentie dans les pièces dont l'aération est insuff-
isante et lorsque une utilisation prolongée de l'appareil est effectuée. Pour
avoir la certitude de travailler dans un environnment réunissant des condi-
tions de confort, santé et de sécurité, il est préférable de bien aérer la pièce
ou se trouve l'appareil.
Acoustic noise (For European Users Only)
Maschinenlärminformations-Verordnung 3. GPSGV: Der höchste
Schalldruckpegel beträgt 70 dB(A) oder weniger gemäss EN ISO 7779.
16 cm4520 Safety Information and Getting Started
Installation and Operation Precautions