Assigning Midi Outputs; Trackinput Monitoring - DigiDesign Control 24 Manual

To make the same output assignment to all
channels simultaneously:
Press APPLY TO ALL CHANNELS or
OPT(ALT)/ALL while assigning an output to a
track.
To make the same output assignment to selected
channels only:
Press APPLY TO ALL SELECTED CHANNELS or
OPT(ALT)/ALL+SHIFT/ADD while assigning an
output to a track.
To add or remove multiple output assignments:
Press CTL/CLUTCH while assigning or dese-
lecting an output to a track.
To temporarily display output assignment:
Press OUTPUT.

Assigning MIDI Outputs

You can view and assign channel outputs for
MIDI tracks on Control|24. You can also assign
multiple MIDI channels to a single track.
To assign MIDI outputs from Control|24:
Press ASSIGN+OUTPUT.
1
Turn the data encoder knob on the track to se-
2
lect the MIDI device and channel.
Press the flashing switch directly below the
3
data encoder knob to confirm your decision. (If
assigning multiple MIDI channels, perform
steps 2 and 3 while pressing SHIFT/ADD.)
When MIDI output assignment is completed,
4
press the Master ASSIGN switch to confirm and
exit Assign mode.
To assign multiple outputs:
While pressing CTL/CLUTCH, while assign-
ing an output to a track.

TrackInput Monitoring

TrackInput monitoring lets you toggle individ-
ual audio tracks between Auto Input and Input
Only monitoring modes at any time, including
during playback or recording.
This feature also makes it possible to toggle a
track between Auto Input and Input Only mon-
itoring mode regardless of whether or not the
track is record enabled.
To toggle the monitoring mode of audio tracks:
Hold the CTL/CLUTCH switch and press the
1
MONITOR/Ø (Monitor/Phase) switch. The
switch flashes to indicate Control|24 is in "Se-
lect Input Monitoring" mode.
Do one of the following:
2
• To toggle individual tracks, press the
SWITCH ACTIVE switch on each channel
you want to toggle.
• To toggle all tracks in the session, hold the
OPT(ALT) ALL switch and press the MONI-
TOR/Ø switch.
• To toggle all selected tracks in the session,
hold the SHIFT/ADD + OPT(ALT)ALL
switches and press the MONITOR/Ø
switch.
Chapter 11: Recording 89