DigiDesign Control 24 Manual page 106

TrackPunch Enabling Tracks
While in TrackPunch mode, you can Track-
Punch enable tracks without record enabling
them, which lets you punch in individual tracks
after you start playback.
To TrackPunch enable or disable an audio track:
Hold the CTL/CLUTCH switch and press the
track's REC ARM switch to toggle the track's on-
screen Record Enable button to solid blue.
To TrackPunch enable or disable all audio tracks:
Hold the CTL/CLUTCH + OPT (ALT) ALL
switches and press any track's REC ARM switch
to toggle the on-screen Record Enable buttons
to solid blue.
To TrackPunch enable all selected audio tracks:
Hold the SHIFT/ADD + CTL/CLUTCH + OPT
(ALT) ALL switches and press a selected track's
REC ARM switch twice to toggle the on-screen
Record Enable buttons to solid blue.
TrackPunch and Record Enabling Tracks
You can simultaneously TrackPunch enable
tracks and record enable them, which starts re-
cording as soon as playback begins.
To simultaneously TrackPunch enable and record
enable an audio track:
Press the track's REC ARM switch to toggle the
track's on-screen Record Enable button to flash-
ing blue and red.
To simultaneously TrackPunch enable and record
enable all audio tracks:
Hold the OPT (ALT) ALL switch and press any
track's REC ARM switch to toggle the on-screen
Record Enable buttons to flashing blue and red.
96 Control|24 Guide
To simultaneously TrackPunch enable and record
enable all selected audio tracks:
Hold the SHIFT/ADD + OPT (ALT) ALL
switches and press a selected track's REC ARM
switch to toggle the on-screen Record Enable
buttons to flashing blue and red.
Track Record Status Display
Each track's on-screen Record Enable button in-
dicates its TrackPunch and record enable status
as follows:
• When a track is both TrackPunch-enabled and
record-enabled, its on-screen Record enable
button flashes blue and red.
Record Enable button
TrackPunch status indication in an audio track in the
Mix window
• When a track is TrackPunch-enabled but not
record-enabled, its on-screen Record Enable
button lights solid blue.
• When a track is record-enabled only, its on-
screen Record Enable button flashes red.
• While a track is recording (in any mode), its
on-screen Record Enable button lights solid
red.
Red (not flashing) indicates recording
(all modes)
Track Record status in the Edit window