Table of Contents
Advertisement
TrackPunch Recording
After you have put Pro Tools in TrackPunch
mode and enabled tracks for TrackPunch record-
ing, you can record with TrackPunch in several
ways.
Punching In On Single Tracks
To punch in on single tracks:
Put Pro Tools in TrackPunch mode.
1
Press the REC ARM switch twice on each track
2
you want to punch in, so that the track is Track-
Punch-enabled only. The track's on-screen
Record Enable button lights solid blue.
Press the RECORD and PLAY switches on the
3
Control|24 transport to start playback.
During playback, punch in and out on indi-
4
vidual TrackPunch-enabled tracks by pressing
their REC ARM switches.
Stop playback. When you are finished with
5
the record pass, track Record Enable status and
transport Record Arm status follow the current
TrackPunch preference settings.
Punching In on Multiple Tracks
To punch in on multiple tracks simultaneously:
Put Pro Tools in TrackPunch mode.
1
Press the REC ARM switch on each track you
2
want to punch in, so that the track is both Track-
Punch- and Record-enabled. The track's on-
screen Record Enable button should flash blue
and red.
Press the PLAY switch on the Control|24 trans-
3
port to start playback.
During playback, press the RECORD switch on
4
the Control|24 transport to punch in and out on
all TrackPunch-enabled tracks simultaneously.
Stop playback. When you are finished with
5
the record pass, track Record Enable status and
transport Record Arm status follow the current
TrackPunch preference settings.
Start Recording on All Tracks
To start recording on all tracks:
Put Pro Tools in TrackPunch mode.
1
Press the REC ARM switch on each track you
2
want to punch in, so that the track is both Track-
Punch- and Record-enabled. The track's on-
screen Record Enable button should flash blue
and red.
Press the RECORD and PLAY switches on the
3
Control|24 transport to start recording on all
record-enabled tracks.
During playback, punch out and back in on
4
individual TrackPunch-enabled tracks by press-
ing their REC ARM switches.
Stop playback. When you are finished with
5
the record pass, track Record Enable status and
transport Record Arm status follow the current
TrackPunch preference settings.
Chapter 11: Recording
97
Hide quick links:
Advertisement
Table of Contents
