Creating And Editing Regions; Separating Regions - DigiDesign Control 24 Manual

Creating and Editing Regions

The Control|24 Edit tools include all the con-
trols found in the Edit Mode, Edit Tool, and Edit
Function sections. The switches mirror their
functions in Pro Tools.
Capturing Regions
To create a new region:
Create a selection of audio or MIDI data. Make
1
sure the selection is within the bounds of an ex-
isting region.
Press CAPTURE in the EDIT FUNCTION
2
switch section. Pro Tools will prompt you to
name the region. The default region name will
be displayed in Channel Bar Display.
If Pro Tools prompts you to name the newly-
3
created region (as determined by the Auto-
Name Separated Regions preference), use your
alpha-numeric keyboard (or the Control|24 nu-
meric keypad) to enter a name for the new re-
gion.
Press ENTER to confirm the region name, or
4
ESCAPE to cancel.

Separating Regions

To separate a new region with the Separate
Region command:
Select the portion of the waveform that you
1
want to separate as a new region. Make sure the
selection is within the bounds of the existing re-
gion.
– or –
Place the edit cursor at the desired split point.
Press SEPARATE (located in the EDIT FUNC-
2
TION switch section). If Pro Tools prompts you
to name the newly-created region (as deter-
mined by the Auto-Name Separated Regions
preference), use your alpha-numeric keyboard
(or the Control|24 numeric keypad) to enter a
name for the new region.
Press ENTER to separate and create the new re-
3
gion, or ESCAPE to cancel.
The new regions will appear in the track in
which it was created, separate from the data sur-
rounding it.
Chapter 10: Navigation and Editing 81