Power Management Setup - DFI BL631-D User Manual

3
BIOS Setup

Power Management Setup

The Power Management Setup allows you to configure your system
to most effectively save energy.
x Run VGABIOS if S3 Resume
x USB KB Wake-up From S3
x Date(of Month) Alarm
x Time (hh:mm:ss) Alarm
↑↓→←
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.
ACPI Suspend Type
This field is used to select the type of Suspend mode.
S1(POS)
S3(STR)
Run VGABIOS if S3 Resume
When this field is set to Auto, the system will initialize the VGA BIOS
when it wakes up from the S3 state. This can be configured only if
the "ACPI Suspend Type" field is set to "S3(STR)". When this feature
is disabled, the system resume time is shortened but system will
need an AGP driver to initialize the VGA card. Therefore, if the AGP
driver of the card does not support the initialization feature, the
display may work abnormally or not function after resuming from S3.
8 4
Phoenix - AwardBIOS CMOS Setup Utility
ACPI Suspend Type
Video Off Method
Video Off In Suspend
Suspend Type
MODEM Use IRQ
Soft-Off By PWR-BTTN
Wake-Up by PCI Card
Power On by Ring
Resume By Alarm
: Move Enter: Select
Enables the Power On Suspend function.
Enables the Suspend to RAM function.
Power Management Setup
S1(POS)
Auto
DPMS
Yes
Stop Grant
3
Instant-Off
Disabled
Disabled
Disabled
Disabled
0
0 : 0 : 0
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults