Irda Connector - DFI BL631-D User Manual

IrDA Connector

IRRX
N. C.
VCC
1
Connect the cable connector from your IrDA module to the IrDA
connector on the system board.
Note:
The sequence of the pin functions on some IrDA cable may be
reversed from the pin function defined on the system board.
Make sure to connect the cable to the IrDA connector accord-
ing to their pin functions.
BIOS Setting
Configure the onboard IrDA functions in the BIOS. Refer to chapter
3 for more information.
Driver Installation
You may need to install the proper drivers in your operating system
to use the IrDA function. Refer to your operating system's manual or
documentation for more information.
Ground
IRTX
5
Hardware Installation
2
49